Rotating Banners

IN STOCK: 3D Print Lens Hood for Canon RF 35mm Macro IS STM


Canon RF 35mm f1.8 IS Macro STM Lens Hood

What's the purpose of a lens hood?
In photography, a lens hood or lens shade is a device used on the front end of a lens to block the Sun or other light source(s) to prevent glare and lens flare. Lens hoods may also be used to protect the lens from scratches and the elements without having to put on a lens cover.
The Canon RF 35mm f1.8 Macro IS STM (MSRP $499.00) should be in every photographers camera bag who owns a Canon EOS R, RP, R5, R6 and any other new/future R-series camera. The image quality is great, lots of great reviews and the price is affordable without breaking the bank but it doesn't come with a lens hood.


Canon offers the EW-52 Lens Hood (MSRP $41.95 - Amazon | B&H PhotoAdorama) as seen above. The EW-52 is a screw-on lens hood and is smaller than your typical round/petal lens hood. I'm not a big fan of screw-on lens hood because if there was strong enough impact, it can damage the lens and its so short that it really doesn't offer that much of a protection. Bigger lens hoods that attach simply slip over the lens, offer more protection to the lens and pop off from accidental impacts.

No other 3rd party manufacturer has released a different type of lens hood for the Canon RF 35mm; they all offer the same EW-52 screw-on style lens hood. This 3D printed lens hood is like the round (cylindrical) bayonet lens hood we are known to seeing on other lenses.

Features:
  • Offers protection from accidental impacts while still blocking stray rays/flare from entering the lens
  • Easy to attach (via friction) and easy to remove
  • Interior is flocked to prevent any glare/reflections (easily removable)
  • Lens hood is reversible for compactness
  • NO vignetting!
Interior flock material is hand-cut and pre-installed onto lens hood. If you do not want it, you can easily remove it. This 3D printed lens hood has (what we feel is) the perfect snug fit when mounted onto the camera lens. It stays on securely and comes off easily.

 COMPATIBILITY

The lens hood is compatible with the following lens:


Review: Hollyland LARK 150 Wireless Clip-On Microphone System



Overview : Add a pair of compact, clip-on wireless microphones for your two-person interview, talk show, documentary production, or vlog with the LARK 150 Wireless Dual Microphone System from Hollyland. The LARK 150 system features two ultracompact microphone transmitters and a receiver that offer a portable, cost-effective, all-inclusive solution for recording two subjects at once to your audio recorder, camera, camcorder, or mobile device.

The LARK 150 system is automatically paired, charged, and stored in the included charging case that charges all three units using its USB input port. The transmitters are small and lightweight at less than 1oz, and they clip onto a lapel or shirt and feature a built-in omnidirectional microphone. They both feature a two-way mute button, built-in clip, and a 3.5mm headphone monitoring output. The receiver features volume buttons, a 3.5mm headphone monitoring output, a 3.5mm line output, and a display that shows the connection and battery status of all three units.

The transmitters feature an anti-vibration design with intelligent noise cancellation and smart frequency selection using FHSS (Frequency Hopping Spread Spectrum) technology for a crisp, clear signal. You can transmit a strong signal with less than 5ms latency at up to 328' away from the receiver. The system also supports switchable safety, stereo, and mono modes for different configurations.

Features :
  • Anti-vibration sound chamber design
  • DSP (Digital Signal Processor) intelligent noise cancellation
  • Built-in high-sensibility omnidirectional silicon microphone on the transmitter
  • Less than 5ms latency at 328' distance
  • Power-On Smart Frequency selection feature
  • Frequency Hopping Spread Spectrum (FHSS) method
  • Small and light transmitters weigh less than 1oz
  • Charging case that supports fast auto-pairing, upgrade, and storage for the whole system
  • Mono/Stereo/Safety switchable output modes
  • Two-way mute buttons on transmitters
  • Real-time audio monitoring with 3.5mm headphone output on transmitters and receiver
  • 3.5mm line output on receiver


Related Posts Plugin for WordPress, Blogger...