Review: Hejnar Photo Canon RF 70-200mm 100-500mm Arca Swiss Tripod Lens Plate

Overview : Lens Plate for Canon RF 70-200mm f/2.8L IS USM Lens and RF 100-500mm f/4.5-7.1L USM Lens. D061 and D065 can be used with cameras with battery grip. D060 may interfere with battery grip and not permit 360 collar rotation.

Features :

• D061 = 2.25 inches long, 1.50 inches wide, Weight: 1.2 oz (33g), 3/8 inches thick plus 0.2 locating pin
• D065 = 3.160 inches long, 1.50 inches wide, Weight: 1.75 oz (50g), 3/8 inches thick plus 0.2 locating pin
• D060 = 3.750 inches long, 1.50 inches wide, Weight: 2.4 oz (67g), 3/8 inches thick plus 0.2 locating pin
• Compatible with: Markins including level release clamp, Really Right Stuff, including level release plate, Arca Swiss, Wimberley, Kirk, Photo Clam, Foba, Vanguard ABH Series Ball Heads (ABH is Vangaurds only Arca-Compatible series), Custom Brackets, Jobu Designs, Acratech, Benro, LeoPhoto, Sirui, Sunwayphoto, FLM, SmallRig, Other Arca Swiss type products
• Precision C.N.C. machined from 6061-T6 Aluminum
• Black hard coat anodized surface
• Stainless steel hardware

Review: Hejnar Photo Canon R5/R6 Arca Swiss Camera Plate D064

Overview : Hejnar Photo Quick Release Arca Type Lens plate for Canon R6 and R5. Double-dovetail design allows for dual clamping surfaces on rail. Plate incorporate Quick Detach socket to attached a standard push-button QD mount. Use the QD socket to attached a standard push-button QD mount. QD system has been used for years by industries around the world including NASA, law enforcement and military agencies. The design inhibits accidental removal, especially when the camera is hanging from the strap. Attach your favorite strap to the clamp, then mount the clamp to any of Arca Type plates, L-brackets or foot replacements.

Features :

• 3.530 inches long, 1.50 inches wide, Weight: 1.65oz (47grams)
• Precision C.N.C. machined from 6061-T6 Aluminum
• Black hard coat anodized surface
• Stainless steel hardware

Review: Platypod Ultra Flat Tripod + Multi Accessory Kit

Overview : The Ultra Plate Camera Support with Multi Accessory Kit from Platypod is a low-profile support for mirrorless and mid-sized cameras. Moreover, the Multi Accessory Kit contains accessories that will help you stabilize and create photographs in combination with the Max Camera Support.

Features :

• Ultra tripod base plate is a flat tripod compatible with any tripod ball head except ones that have knobs that extend past the bottom of the head.
• At just 4.3 mm thick and about the size of an, 5.08 x 3.36, Ultra is the perfect travel buddy by fitting in any photography bag.
• 4 titanium “legs” for stability on uneven surfaces, with spikey or rubber ends depending on where you need stability.
• Attach to tripods or quick-release devices with the ¼-20 and 3/8-16 accessory threaded holes
• Includes a 20 inch-cinch strap to mount Ultra to poles or branches, creating a stable surface for timelapse and HDR photography.

Review: Hejnar Photo Table Pod with Ball Head and Clamp

Overview : Table Pod / Low Pod Mount with Ball Head and Clamp will be helpful for macro and closeups in the field and indoors when heavy photographic gear are involved. Small tabletop tripods do not offer good support for low level shooting with heavy camera and lenses.

Table Pod is equipped with Gizomos GHP-30D Ball Head and Hejnar Photo 1.5 inch Clamp. Ball head can be attached in five different location to optimize gravity point for stability. Four rubber-covered feet keep the mount stable on rocks and other uneven surfaces. This setup will support up to 17 pounds (8kg)

Specifications :

• 6.0 inch long
• 4.0 inch wide
• Plate thickens 0.350 Inch
• Outside holes are taped 10-32 and spaced 45mm or 30mm apart from each other. They can be used for direct clamp mount
• Precision C.N.C. machined from 6061-T6 Aluminium
• Compatible with any ball head equipped with 3/8 thread.
• Stainless steel hardware.
• Made in USA
• Black hard coat anodized surface.

Review: K&F Concept KF-TM2534T Aluminum Camera Tripod

[success headline="DISCOUNT:"]We were able to work out a deal to allow our readers to receive $25 OFF using coupon code KFDEAL25. Coupon expires March 7, 2025.[/success]
Overview : Tripod legs are made of magnesium aluminum alloy that can be folded for light and easy to carry. The magnesium aluminum alloy with good stability, and it has adjustable angle suitable for different locations. Inverted central axis to achieve macro photography abd automatic stability suspension system. Tripod can also be converted into a monopod by removing one of the legs.

Features :

• 25mm 4 section aluminum alloy legs adjust to 25, 50, and 80-degree angles to enable extreme low angle photography
• Compact The tripod legs can be inverted and folded back 180 degrees making it small enough to carry just about anywhere.
• Smooth fluid-like ball head rotates 360 degrees and includes a quick release plate and bubble levels.
• Hexagon-shaped central column moves from 0 to 180 degrees
• FOUR Leg Sections: Get the height you need and ultimate versatility. Twist Lock Legs with Anti-Rotation System: innovative rubberized locking grips combined with anti-rotation legs enable fast and fumble free set up plus weather and dust resistance.
• This complete tripods comes with 2 Sections Center Column: Get the height you need and ultimate versatility.
• Folded height: 14.76", Extended height: 72.24", Weight: 3.04lbs/1.38 kg
• LIGHT WEIGHT: It's ideal for indoor and outdoor photography, you can take it anywhere making it perfect to all events, such as sports activities, camping, family gatherings and much more.

Review: Pakpod Adventure Compact Travel Tripod

Overview : The Adventure Tripod from Pakpod is a compact, lightweight, travel-friendly tripod designed to accompany you on any outdoor adventure. The key to the Pakpod's utility is it's ABS and stainless steel construction which keep the frame lightweight at just 15.5 oz but makes it sturdy enough to support up to 11 lb. The chosen materials allow the tripod legs to bend under light pressure rather than break and make the tripod completely waterproof and rust-resistant.

With a maximum height of 17.75" and a minimum working height of 1.5" the Pakpod is fairly versatile in height. Adding to its versatility are three retractable stainless steel spikes - one at the bottom of each leg - which can be used to anchor the tripod in dirt, sand, or snow. The tripod also includes a set of built-in mini tools for maintenance and adjustment in the field.

Features :

• Lightweight: 15.5 ounces
• Length when folded: 12.75"
• Waterproof and freeze-proof
• Patented, one-twist locking system
• Easily stashable in a small bag, pack or suitcase
• Legs rapidly extend and retract with the push of a button
• Legs move independently through a 180 degree range of motion
• Constructed from high-impact ABS plastic and stainless steel
• Rotating feet stake into grass, dirt, sand and snow
• Unparalleled level of versatility
• 36 tie-down points

Review: FLM CP30-M4S Carbon Fiber Tripod

Overview : The FLM CP30-M4S Carbon Fiber Tripod is especially suited for panorama photography. They can be integrated with an FLM Leveling able center column (available separately). The smallest CP30 has minimum stored dimensions 45cm and the FLM tripod head fits elegantly and perfectly between the tripod legs, without changing the overall stored dimensions. Each FLM Centerpod may also be used without a center column and include a changing thread from 1/4" and 3/8".

The CP30-M4S FLM Centerpod Tripod has 4 tube segments and the uppermost tube is 30mm in diameter. The height when closed is 470mm and the maximum height when fully extended with the center column is 1530mm. The weight is approx. 1.5kg and it has a load capacity of 15kg. CP30-M4S model has a retractable hardened steel tip / foot, for protection when not in use. With a few twists you can change the system from cushioned rubber to steel tip - quick and secure.

Features :

• Lightweight: 3.3 lb
• Load Capacity: 33.1 lb
• Maximum Height: 60.2"
• Minimum Height: 5.1"
• 4 Sections
• 8-Layer Carbon Tubing
• Twist Locks
• Retractable Spiked Feet
• Removable Center Column

Review: FLM QRP-70 Quick Release Plate

Overview : The QRP-70 from FLM is a dovetail quick-release plate made for cameras with a 1/4"-20 tripod thread. It allows you to quickly attach and detach your camera from a tripod, monopod or other support. The cork-coated surface protects the bottom of your camera body and prevents camera-twist.

Features :

• Cork-Coated Surface
• Laser Engraved Scale

Technical Specifications :

• Camera socket (inch): 1/4 = 0.64cm
• Dimensions (mm): 70 length x 44 width x 10 height
• Weight (g): 56
• Max. Load (kg): 60

Review: FLM SRB-60 Quick Release Clamp

Overview : The FLM SRB-60 60mm Clamp Style Quick Release Base can be attached to a 3/8" screw using threadlock adhesive. It has a small stud which prevents the plate from sliding when partially unlocked. This base is suitable for FLM and other Arca-compatible camera plates.

Features :

• Arca-Style Compatible
• Safety Pin
• Bubble Level

Technical Specifications Base:

• Bottom thread (inch): 3/8 = 0.95cm
• Dimensions (mm): 60 diameter x 15 height
• Weight (g): 93
• Max. load (kg): 45

Review: FLM CB-48FTR Professional FT Series Ball Head

Overview : The FLM CB-48 FTR 1.8" Ball Head with Friction / Tilt has 3/8" bottom thread to attach to tripods or monopods and 1/4" & 3/8" connection thread for camera attachment or other specialist accessory. The FT (Friction / Tilt) series is based on the characteristics of the F series. The additional patented 'Neigen / Tilt' knob function isolates the Center ball so it can only be used in one vertical plane perpendicular to the Tilt knob.

The FTR is also fitted with the Rast-System PRS Pan click-lock knob for panorama shots. This allows you to obtain a perceptible and audible click-lock positioning every 15deg. in a horizontal plane for the shots being taken. It can be used with the FLM CP30 series tripods.

Features :

• Maximum Load Capacity: 99.2 lb
• Adjustable Friction
• 360° Panning
• Patented Tilt Function
• PRS System for Panoramas
• Made in Germany

Technical Specifications :

• Type: Centerball
• Ball diameter (mm): 48
• Camera socket (inch): 1/4 = 0.64cm
• Bottom thread (inch): 3/8 = 0.95cm
• Dimensions (mm): 65 diameter x 99 height
• Weight (g): 593
• Max. Load (kg): 45

Review: Fotopro NGC-65 Carbon Fiber Monopod

Overview : The NGC-65 Monopod is a lightweight carbon fiber tripod. Ideal for sports, hiking, and travel photographers. The ergonomic G-Lock leg lock system makes it easy to extend or collapse the monopod.

Features :

• 100% Carbon fiber tubes
• Universal camera screw with 3/8 & 1/4
• Extended max height: 57 Inch (1460 mm)
• Folded length: 16 inch (405 mm)
• With support & carry pouch
• Weight: 0.8 pounds
• Capacity: 11 pounds

Review: VARAVON 523 MHD Monopod Set - 520 Monopod + 103 Video Head

Overview : Varavon's 523 Fluid Head and Monopod System combines the Varavon 103HD fluid head and 520M monopod to give you fluid head control with the nimbleness of a monopod. Supporting up to 11 pounds of camera, with fluid dampened pan and tilt movements, the head features an integrated sliding balance plate. The plate is indexed, for quick balance resets. The QR (Quick Release) plate makes it fast to pop the camera off the set up when you need to go hand held, and pop it back on when you need a steadier shot. The fluid head features a bubble level, for precise level adjustment, and pan bar mounting rosettes on both sides of the head, the system includes one pan bar.

The monopod is made from polycarbonate to be lightweight, durable and impact resistant. It extends from 23 to 65 inches, about 27.5 to 69.5 inches including the head, giving you additional height of almost six feet. This is useful when trying to shoot over a crowd. the ball joint rubber foot, gives you solid grip on hard surfaces, even when the surfaces aren't completely level, and the rubber foot retracts, exposing a spiked foot for better grip on soft ground.

Monopod Features :

• Supports 3/8" screw
• Spiked foot
• Handstrap & Folding Quick Lever
• Width: 2.7 inches
• Height: 23 inches
• Max length: 64 inches
• Diameter: 1.4 inches
• Material: Polycarbonate
• Weight: 1.8lb

Video Head Features :

• Width: 3.8 inches
• Height: 4.7 inches
• Depth: 5.2 inches
• Bubble level
• Material: Aluminum
• Weight: 2.2lb
• Panbar weight: 0.5lb

Review: MoGoPod MK III Monopod + MCR-1 Belt Kit + TPD-2 Tripod Leg Stand

Overview : The new MoGoPod MK III is a unique monopod stabilizer that can be used right side up, or upside down! It's unique internal steel belt drive system adjusts the MoGoPod quickly to automatically telescope the MoGoPod to any height, and locks down with a simple twist lock.

The Markings on the MoGoPod MK III allows you to remember your favorite settings so you can easily repeat a previous setup.

The MoGoPod MK III is also the only Monopod that allows you to use it upside down. Remove the rubber foot to reveal a ¼-20 inch threaded stud, and re-locate the rubber foot at the top stage. Now the MoGoPod is the perfect quick telescoping pole allowing you new perspectives with your small cameras.

The MoGoCrane Belt wraps around your waist with an adjustable belt and the threaded compact aluminum unit lets you securely attach the MoGoPod. The MoGoCrane brings a new style of shooting. Portable and affordable, this unique take on a mini jib will definitely change the way you shoot.

The Tripod Leg Stand allows you to add a stable base made of three 8" foldable high quality metal legs with rubber ends to your MoGoPod. After using the legs you are able to fold it back up on the bottom of the MoGoPod and it will be ready in a few seconds when needed.

MogoPod MK III Features :

• Maximum Height: 41 inches (S) / 62 inches (M)
• Collapses to: 20 inches (S) / 27 inches (M)
• Lightweight - Weight: 1.3 lb (S) / 1.6 lb (M)
• Load Capacity: 5 kg/10 lb
• Material: Anodized Aluminum for Maximum Durability

MogoCrane Belt Kit Features :

• Only 7" inches wide
• Wraps around your waist with an adjustable belt
• Female ¼-20 inch threads

Tripod Leg Stand Features :

• 8" Long Legs with Rubber Ends
• Foldable Tripod Legs
• Female ¼-20 inch threads

Review: Sunwayfoto XB-52DL Duo-Lever Tripod Ball Head

Overview : The XB-52 Low Profile Ball Head from Sunwayfoto is the larger of two ball heads in the XB line of low profile ball heads from Sunwayfoto. It features a very low center of gravity, very high load capacity (132 lb) and improved ball head design for smoother movements when changing position. It includes the two-drop-notch design for camera orientation, and rubber has been abolished completely—all knobs are now all-metal on the XB-52.

XB-52DL with DLC-60 Lever / Screw Combo Clamp. The screw knob side is for adjusting the width of the clamp, and the lever side is for locking the clamp.

Features :

• Locking System is located on the side of the ball instead of the bottom of the ballhead. Whole center of gravity is lowered more than 15%;
• Adopts geared locking structure, higher locking strength;
• Specially designed panning base, smooth operation;
• Elliptical ball for progressive resistance and avoiding suddenly sliding down;
• Two drop notch design. One for portrait, one for tilting;
• All metal knobs for reliability and long term durability;
• Two set spirit level mounting holes for users to mount the removable spirit level to the other sides of the clamp;
• Special structure makes it the lightest of its class;
• 360° panning movement with calibrated precision, precisely capture overlapping panoramic images;
• Compatible with Really Right Stuff (RRS), Wimberley, Jobu Design, Arca Swiss, Kirk Enterprises, Markins, Photo Clam etc.;
• Ideal for Gitzo, Manfrotto, Sirui, Benro, RRS tripod

Specification :

• Ball Diameter: 52mm
• Base: 68mm
• Height: 91mm
• Weight: 690g
• Max load: 60kg (132 lbs)
• Bottom thread: 3/8″ with 1/4″ adapter

Review: Manfrotto 561BHDV-1 Fluid Video Monopod

Overview : Manfrotto's Fluid Video Monopod w/Head will take you somewhere you might never have been: more than 6 feet off the ground with a monopod. The maximum height of 6.56' (200 cm), minimum height of 2.5' (76.5 cm), and included compact, lightweight fluid head of this 4-section aluminum monopod give you versatility to spare. The head has a long sliding plate, and the ergonomic pan-bar provides smooth panning and tilting. Three mini supports at the base bring added stability. This monopod and head were designed specifically for light prosumer and professional compact HD camcorders plus lightweight spotting scopes (up to 8.8 lbs).

Features :

• The ergonomic pan-bar allows smooth panning and tilting movements
• Maximum height of 6.56' (200 cm)
• Minimum height of 2.5' (76.5 cm)
• The small, compact and lightweight fluid head was developed and designed to specifically to support the latest light prosumer and professional compact HD camcorders plus lightweight spotting scopes up to 8.8 lbs
• Updated controls on the fluid head allow a more solid grip and better fluidity, plus improved performance and ergonomics
• The fluid head's improved internal fluid cartridges, a pan-bar rosette and a bigger sliding plate optimize the position of the camera or spotting scope, relative to its center of gravity

Review: Fotopro C5i Camera Tripod Monopod Kit with FPH-52Q Ball Head

Overview : The C5i range are a beautifully designed Aluminium-magnesium tripod which has all the functions required for a professional tripod with the addition of a built in monopod. Using an advanced anodic oxidation process these colorful tripods are wear and scratch resistant and have a sleek smooth finish. The reverse folded function enables this to be of a compact size and the construction using Fotopro advanced manufacturing technology creates a very durable and stable tripod. Using an ergonomic G-Lock design, leg locks only need a ¼ turn to lock or loosen the leg sections. The molded rubber locks are easy to handle even when wearing gloves. The 2 sectioned center column can easily be reversed which is ideal for low level use and contains an attachment to hang additional weight. The C5i comes complete with a color matched FPH-52Q ball, together with a free high quality case.

Features :

• Light Weight: The C5i aluminium-magnesium tripod weighs 3.7 pounds.
• Compact Size: Great for Traveling as it features a reversible design, which makes the tripod shorter, portable and easy to carry.
• Versatile: 2-in-1 Tripod / Monopod
• Monopod: The tripod leg can easily be removed and transformed into a monopod.
• Ergonomic: The ergonomic G-Lock design allows for a quick and simple ¼ turn to lock or loosen the leg sections.
• Arca Swiss: The C5i comes complete with a Arca Swiss compatible FPH-52Q ball.
• Weight: 3.7 pounds
• Capacity: 17.6 lbs.
• Max height: 61.8 in.
• Min height: 9.4 in.
• Folded length: 16.9 in.

Review: Peak Design PRO Plates - ARCAplate, DUALplate, MICROplate

Overview : Everything you could possibly want in one quick-release plate. PRO Plates works in ARCA-type tripod heads, and can also be configured to fit in both ARCA and most Manfrotto® RC2 tripod heads. Slides in Capture in 4 directions, and contains 4 loops for connecting Peak Design Anchors. MICROplate slides into Capture in 2 directions and has 1 loop for hand straps or Peak Design Anchors.

• ARCAplate* – a revamped version of Capture’s standard plate, works with most ARCA-type tripods and slides into Capture in 4 directions.
• DUALplate* – works with most Manfrotto® RC2 and ARCA-type tripods and slides into Capture in 2 directions.
• MICROplate – fits perfectly on Micro 4/3 and slim-body cameras, works with most ARCA-type tripods and slides into Capture in 2 directions.

*Note that the DUALplate and ARCAplate has been replaced with the PROplate.

Features :

• Machined and anodized aluminum construction
• D-ring connection screw with hex drive
• Injection molded twist-resistant rubber pads
• Sling strap compatibility
• Lifetime guarantee

Review: Hejnar Photo Point and Shoot Arca-Swiss Quick Release Plate

Overview : Quick Release plate for small P&S cameras and other lightweight equipment.

Features :

• 1.5 inch long
• 0.8 inch wide
• 5/16 inch thick.
• Two slots. (More flexibility with mounting options)
• One 1/4-20 taped hole
• Precision C.N.C. machined from 6061-T6 Aluminium
• Compatible with Kirk, R.R.S., Arca-Swiss, and many other Arca-Swiss style Quick release plates.
• Stainless steel hardware.
• Black Hard Coat Anodized

Review: Hejnar Photo Universal Camera Arca-Swiss Quick Release Plate

Overview : 2.375 inch plate with one strap loop. Compatible with Arca-Swiss style quick release clamps.

Features :

• Length: 2.375 plus strap loop
• Wide 1.50 inch
• Thick: 3/8 inch
• One captive style screw slot.
• Made from 6061-T6 Aluminum.
• Made in USA
• Black hard coat Anodized.
• Used with various cameras

Review: Hejnar Photo Arca-Swiss Quick Release Clamp - Sling Strap

Overview : Quick Release Clamp to be used with sling straps, tripods or monopods.

Features :

• Center socket is countersunk on top but also threaded 3/8-16.
• Knob is captive. Knob stops at maximum opening - cannot be lost in the field
• Back side has groove to match some ball heads connection and preventing it from twisting.
• Length 1.50 (38.1mm)
• Weight 3.6oz (103g)
• Precision C.N.C. machined from 6061-T6 Aluminium
• Compatible with Kirk, R.R.S., Arca-Swiss, and many other Arca-Swiss style Quick release plates.
• Stainless steel hardware.
• Made in USA
• Black Hard Coat Anodized Surface